show spantree spanguard-autounlock

Use this command to display the Span Guard Autounlock status.

Syntax

Defaults

N/A

Mode

All command modes.

Usage

Span Guard Autounlock sets the automatic unlocking of spanguard-locked ports when operstatus is not up (for example, link loss). When the value is enable the port becomes unlocked. When the value is disable the port remains locked until manually unlocked using the set spantree spanguard-autounlock or clear spantree spanguard-autounlock commands.

show spantree spanguard-autounlock
Span Guard AutoUnlock is set to enable