show ipv6 slb vservers

Use this command to display IPv6 virtual server information.

Syntax

show ipv6 slb vservers [detail | name virtserver-name]

Parameters

detail (Optional) Displays detailed output.
name virtserver-name (Optional) Specifies a virtual server name for which to display information.

Defaults

If virtserver-name is not entered, information about all configured virtual servers will be displayed.

If detail is not specified, summary information will be displayed.

Mode

All command modes.

Examples

This example shows how to display a detailed level of information about all IPv6 LSNAT virtual servers:

System(rw)->show ipv6 slb vserver detail
Virtual-Server: http-lsnat64 (ACTIVE) (IPv6)
   First IP Address: 2555::1
   Last  IP Address: 2555::1
   Virtual IP Global to all VRFs: No
   Port:                              80 Hits:                        27895
   IP Protocol:                      TCP Current Conns:               11330
   Sticky Timeout:                  7200 Sticky Type:         SIP,DIP,DPORT
   Idle Timeout:                   65535 UDP One Shot:                   NO
   VRRP Intf:                       None VRRP Vrid:                       0
   State Changes:                      3 Match Source Port:           Exact
   Service Type:                    None
   Server-Farm:                http-farm (IPv4)
   Source NAT Pool:           4.4.0.0/15
   Client Access Acl:            Not Set
   Last state change:             MON JUL 16 15:25:15 2012
   Last state change reason:      Source NAT Pool configuration
Virtual-Server: http-lsnat66 (ACTIVE) (IPv6)
   First IP Address: 2555::2
   Last  IP Address: 2555::2
   Virtual IP Global to all VRFs: No
   Port:                              80 Hits:                        27895
   IP Protocol:                      TCP Current Conns:               11330
   Sticky Timeout:                  7200 Sticky Type:         SIP,DIP,DPORT
   Idle Timeout:                   65535 UDP One Shot:                   NO
   VRRP Intf:                       None VRRP Vrid:                       0
   State Changes:                      1 Match Source Port:           Exact
   Service Type:                    None
   Server-Farm:           http-farm-ipv6 (IPv6)
   Source NAT Pool:           2444::/111
   Client Access Acl:            Not Set
   Last state change:             MON JUL 16 15:19:56 2012
   Last state change reason:      INSERVICE setting changed
Vservers in active state: 2
System(rw)->