clear lldp

Use this command to return LLDP parameters to their default values.

Syntax

clear lldp {all | tx-interval | hold-multiplier | trap-interval | med-fast-repeat}

all	Returns all LLDP configuration parameters to their default values, including port LLDP configuration parameters.
tx-interval	Returns the number of seconds between transmissions of LLDP frames to the default of 30 seconds.
hold-multiplier	Returns the multiplier to apply to the transmit interval to determine the time-to-live value to the default value of 4.
trap-interval	Returns the minimum time between LLSP trap transmissions to the default value of 5 seconds.
med-fast-repeat	Returns the number of fast start LLDPDUs to be sent when an LLDP-MED endpoint device is detected to the default of 3.

None.

All command modes.

This example returns the transmit interval to the default value of 30 seconds.

System(rw)->clear lldp tx-interval

Published May 2016prev | next