Use this command to configure the 802.1 priority for continuity check messages and linktrace message sent by this MEP.
| priority | Specifies the priority for continuity check messages or linktrace messages sent by the MEP. Valid values are 0 - 7. The default value is 1. |
Continuity check message and linktrace message priority defaults to 1.
Maintenance End-Point Configuration mode.
Continuity check priority values are inserted into the VLAN tag.
The “no” form of this command resets the continuity check message and linkstate message to the default value of 1.
This example shows how to set set the continuity check message and linkstate message priority for MEP 1000 to 3:
System(rw-config)->cfm md string-name myMD1 System(su-config-cfm-md.1)->ma string-name myMA1 System(su-config-cfm-ma.1)->mep 1000 System(su-config-cfm-mep.1000)->priority 3 System(su-config-cfm-mep.1000)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB