show lldp port network-policy

Use this command to display LLDP port network policy configuration information. Network policy information is configured using the command.

Syntax

show lldp port network policy {all | voice | voice-signaling | guest-voice | guest-voice-signaling | software-voice | video-conferencing | streaming-video | video-signaling} [port-string]

Parameters

all Displays information about all network policy applications.
voice Displays information about only the voice application type.
voice-signaling Displays information about only the voice signaling application type.
guest-voice Displays information about only the guest voice application type.
guest-voice-signaling Displays information about only the guest voice signaling application type.
software-voice Displays information about only the softphone voice application type.
video-conferencing Displays information about only the video conferencing application type.
streaming-video Displays information about only the streaming video application type.
video-signaling Displays information about only the video signaling application type.
port-string (Optional) Displays information about LLDP network policy for one or a range of ports.

Defaults

If port-string is not specified, only non-default values will be displayed for all ports that have non-default values configured.

If a port-string is specified, then all values, default and non-default, are displayed for the specified ports.

Mode

All command modes.

Example

This example shows how to display all LLDP network policy information for ge.1.1.

System(rw)->show lldp port network-policy all ge.1.1
Ports    Application            State     Tag       Vlan-Id   Cos   Dscp
-------  ---------------------  --------  --------  -------   ---   ---
ge.1.1   voice                  enabled   untagged  10        7      44
         voice signaling        enabled   untagged  10        7      44
         guest voice            enabled   untagged  10        7      44