clear dcb cn priority

Use this command to clear congestion notification configuration for the specified priority and context.

Syntax

clear dcb cn priority priority {[entry] [status] [choice] [alt-pri] [defense] [creation] [lldp]}

Parameters

priority Specifies the CNPV to be cleared for the specified context.
entry Deletes a congestion notification priority table entry for the specified CNPV.
status Resets the status to the default value to enabled for the specified CNPV.
choice Resets the domain defense choice to the default of auto.
alt-pri Resets the alternate priority for the specified CNPV to the default of next lowest non-CNPV priority value or next highest non-CNPV value if all lower values are CNPV, if global defense choice is set to auto. If global defense choice is set to admin, the alternate priority defaults to 0.
defense Resets the domain defense method for the specified CNPV to the default value of:
  • Edge – If priority choice is set to auto
  • Disabled – If priority choice is set to admin
creation Resets the CNPV auto creation for all ports to the default value of enabled.
lldp Resets the congestion notification LLDP state to the default value of enabled.

Defaults

None.

Mode

All command modes.

Examples

This example deletes congestion notification entry CNPV 3:

System(rw)->clear dcb cn priority 3 entry