show spantree adminpoint

Use this command to display the administrative point-to-point status of the LAN segment attached to a Spanning Tree port.

Syntax

show spantree adminpoint [port port-string]

Parameters

port port-string (Optional) Displays point-to-point status for specific port(s). For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide.

Defaults

If port-string is not specified, status will be displayed for all Spanning Tree port(s).

Mode

All command modes.

Example

This example shows how to display the point-to-point status of the LAN segment attached to ge.2.7:

System(rw)->show spantree adminpoint port ge.2.7
Port ge.2.7 has a Port Admin Point to Point of Auto