Use this command to display IS-IS router neighbors.
None.
None.
All command modes.
This example shows how to display IS-IS neighbors:
System(rw)->show isis neighbors System ID Type Interface IP Address State Holdtime Circuit Id 4444.4444.4444 L1 vlan.0.500 23.0.0.44 UP 24 AAAAAAAAAAAA 4444.4444.4444 L1 vlan.0.500 fe80::21f:45ff:fe4d:8768 UP 24 AAAAAAAAAAAA BBBB.BBBB.BBBB L1 vlan.0.500 23.0.0.8 UP 25 AAAAAAAAAAAA BBBB.BBBB.BBBB L1 vlan.0.500 fe80::21f:45ff:fe62:98ee UP 25 AAAAAAAAAAAA 4444.4444.4444 L2 vlan.0.500 23.0.0.44 UP 29 AAAAAAAAAAAA 4444.4444.4444 L2 vlan.0.500 fe80::21f:45ff:fe4d:8768 UP 29 AAAAAAAAAAAA BBBB.BBBB.BBBB L2 vlan.0.500 23.0.0.8 UP 26 AAAAAAAAAAAA BBBB.BBBB.BBBB L2 vlan.0.500 fe80::21f:45ff:fe62:98ee UP 26 AAAAAAAAAAAA BBBB.BBAA.AAAA L1 vlan.0.700 6.6.6.88 UP 7 BBBBBBAAAAAA BBBB.BBAA.AAAA L1 vlan.0.700 fe80::a8bb:ccff:fe06:688 UP 7 BBBBBBAAAAAA System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB