show snmp notifyfilter

Use this command to display SNMP notify filter information and determine which SNMP profiles will not receive SNMP notifications.

Syntax

show snmp notifyfilter [profile] [subtree oid-or-mibobject] [volatile | nonvolatile | read-only]

Parameters

`profile`	(Optional) Displays a specific notify filter.
subtree `oid-or-mibobject`	(Optional) Displays a notify filter within a specific subtree.
volatile \| nonvolatile \| read-only	(Optional) Displays notify filter entries of a specific storage type.

Defaults

If no parameters are specified, all notify filter information will be displayed.

Mode

All command modes.

Example

This example shows how to display SNMP notify filter information. In this case, the notify profile “pilot1” in subtree 1.3.6 will not receive SNMP notification messages:

System(rw)->show snmp notifyfilter
Profile         = pilot1
Subtree         = 1.3.6
Subtree mask    = ff:02:e7:45
Filter type     = included
Storage type    = nonVolatile
Row status      = active

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback