Use this command to configure a destination port for this IKE map.
| port | Specifies an SA destination device port for this IKE map. Default value is any port. |
None.
IKE map configuration.
Use this command to specify a destination port for this SA when a specific protocol such as HTTPS is being authenticated.
Use the “no” option for this command to reset the IKE map destination port configuration to the default value of any port.
This example shows how to set the destination port for this SA to the standard RADIUS port 500:
System(su-config)->crypto ike-map winRadius System(su-crypto-map)->dst-port 500 System(su-crypto-map)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB