clear port vlan

Use this command to reset a port‘s 802.1Q port VLAN ID (PVID) to the host VLAN ID 1.

Syntax

clear port vlan port-string

Parameters

port-string Specifies the port(s) to be reset to the host VLAN ID 1. For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide.

Defaults

None.

Mode

All command modes.

Example

This example shows how to reset ports 3 and 11 to a VLAN ID of 1 (Host VLAN):

System(rw)->clear port vlan ge.1.3,ge.1.11