Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear config

Use this command to clear the user-defined switch and router configuration parameters for one or more modules.

Syntax

clear config {mod_num | all | restore-point index}

Parameters

mod_num | all Clears configuration parameters in a specific module or in all modules.
restore-point index Clears the restore point for the specified index.

Defaults

None.

Mode

All command modes.

Usage

Executing clear config on one or all Extreme Networks S- K- or 7100-Series modules resets the affected modules back to factory defaults. If the module is in a chassis with other active modules, it will inherit system settings from the system.

Example

This example shows how to clear configuration parameters in all modules:

System(rw)->clear config all
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page