Use this command to display IPv4 virtual server information.
| detail | (Optional) Displays detailed output. |
| name virtserver-name | (Optional) Specifies a virtual server name for which to display information. |
If virtserver-name is not entered, information about all configured virtual servers will be displayed.
If detail is not specified, summary information will be displayed.
All command modes.
This example shows how to display a detailed level of information about all IPv4 LSNAT virtual servers:
System(rw)->show ip slb vservers detail Virtual-Server: http-lsnat44 (ACTIVE) (IPv4) First IP Address: 5.5.5.1 Last IP Address: 5.5.5.1 Virtual IP Global to all VRFs: No Port: 80 Hits: 27548 IP Protocol: TCP Current Conns: 11159 Sticky Timeout: 7200 Sticky Type: SIP,DIP,DPORT Idle Timeout: 65535 UDP One Shot: NO VRRP Intf: None VRRP Vrid: 0 State Changes: 3 Match Source Port: Exact Service Type: None Access Clients: 0 Server-Farm: http-farm (IPv4) Source NAT Pool: Not Set Client Access Acl: Not Set Last state change: MON JUL 16 15:26:02 2012 Last state change reason: Source NAT Pool configuration Virtual-Server: http-lsnat46 (ACTIVE) (IPv4) First IP Address: 5.5.5.2 Last IP Address: 5.5.5.2 Virtual IP Global to all VRFs: No Port: 80 Hits: 27547 IP Protocol: TCP Current Conns: 11160 Sticky Timeout: 7200 Sticky Type: SIP,DIP,DPORT Idle Timeout: 65535 UDP One Shot: NO VRRP Intf: None VRRP Vrid: 0 State Changes: 1 Match Source Port: Exact Service Type: None Access Clients: 0 Server-Farm: http-farm-ipv6 (IPv6) Source NAT Pool: 2333::/111 Client Access Acl: Not Set Last state change: MON JUL 16 15:19:56 2012 Last state change reason: INSERVICE setting changed Vservers in active state: 2 System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB