Use this command to enable or disable SNMP trap messaging, globally and on one or more ports, when moved source MAC addresses are detected.
| port-string | (Optional) Specifies the port(s) on which to enable or disable MAC address traps. For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide. |
| enable | disable | Enables or disables SNMP trap messaging when moved source MAC addresses are detected. |
If port-string is not specified, moved MAC address traps will be globally enabled or disabled.
All command modes.
The SNMP trap messaging when moved source MAC addresses are detected feature must be enabled both globally and on affected ports as two separate entries.
This example shows how to enable SNMP trap messaging on ports ge.1.4-8:
System(rw)->set movedaddrtrap enable System(rw)->set movedaddrtrap ge.1.4-8 enable
Print
this page
Email this topic
Feedback
View PDF
Download EPUB