Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set inlinepower powertrap

Use this command to disable or enable the sending of an SNMP trap message whenever status changes occur in the chassis PoE power supplies or the PoE system redundancy.

Syntax

set inlinepower powertrap {disable | enable}

Parameters

disable | enable Disables or enables trap messaging for the chassis PoE power supplies.

Defaults

None.

Mode

All command modes.

Example

This example shows how to enable a chassis power supplies trap:

System(rw)->set inlinepower powertrap enable
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page