Use this command to create a mirror destination. After you have created a mirror destination, you must assign a port to the mirror destination using the set mirror ports (S-, K-Series) command and assign the mirror destination to a policy rule (using the set policy rule (S-, K-Series) command) or a policy role (using the set policy profile command).
| control-index | The index number (1–255) that identifies the mirror destination. The set policy rule and the set policy profile commands refer to this number as the mirror-index. |
None.
All command modes.
This example shows how to create mirror destination 1:
System(rw)->set mirror create 1
Print
this page
Email this topic
Feedback
View PDF
Download EPUB