Use this command to cause the router to return a TCP RST (reset) packet when a client tries to access an IPv4 real server directly on a TCP port used by LSNAT.
None.
TCP reset is disabled by default.
Configuration command, Global configuration mode.
The “no” form of this command resets the TCP reset configuration to the default value of disabled.
This example shows how to enable the return of a TCP RST packet when a client tries to access an IPv4 real server directly on a TCP port used by LSNAT:
System(rw-config)->ip slb real-server access tcp-reset
Print
this page
Email this topic
Feedback
View PDF
Download EPUB