Use this command to display Application Priority table entries by port.
| port-string | (Optional) Specifies the port string for the Application Priority settings to display. For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide. |
If port-string is not specified, Application Priority settings for all ports are displayed.
All command modes.
This example shows how to display Application Priority settings for port tg.1.1:
System(rw)->show dcb appPri tg.1.1 Port Protocol Protocol ID Priority ------------ --------- ----------- -------- tg.1.1 ethertype 1900 4 tg.1.1 tcp 3260 5 tg.1.1 tcp/udp 5600 1 System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB