show policy dynamic

Use this command to display the status of dynamically assigned policy profile options.

Syntax

show policy dynamic {[override] [syslog-default] [trap-default]}

override	Shows the status of which current profile admin or dynamic assignment rules are overriding the other.
syslog-default	Shows the status of automatically sending Syslog messages when a dynamic rule is applied (S-, K-Series).
trap-default	Shows the status of automatically sending SNMP trap messages when a dynamic rule is applied (S-, K-Series).

None.

All command modes.

This S- and K-Series example shows how to display the status of Syslog message sending when a dynamic rule is applied:

System(rw)->show policy dynamic syslog-default
Syslog-default is ENABLED

This 7100-Series example shows how to display which current profile admin or dynamic assignment rules are overriding the other:

System(rw)->show policy dynamic override
Dynamically assigned rules CURRENTLY OVERRIDE administratively assigned rules.

Published May 2016prev | next