show probe session

Examples

This example displays probe sessions:

System(su)->show probe bfdDoc session
Client Codes: P-policy based routing, S-SLB, V-VRRP, W-TWCB, U-tunnel
              R-static routes, I-IP SLA, G-routing protocols
Probe: bfdDoc, bfd
IP Address                        Port  Status    StChngs Last Change   Clients
--------------------------------- ----- --------- ------- ------------- -------
10.211.254.2                      0     Up        1            6h29m37s G
Displayed 1 sessions
Displayed 1 probes, 1 sessions
System(su)->

show probe sessions Output Details provides an explanation of the show probe sessions command output.

show probe sessions Output Details

Output...	What it displays...
IP Address	Specifies the IP address the probe is monitoring.
Port	Specifies the port the probe is monitoring
Status	Specifies the port status.
StChngs	Specifies the number of state changes that have occurred since session creation.
Last Change	Specifies period of time since the last state change.
Clients	Specifies the probe local application type(s): P – Policy Based Routing probe S – Server Load Balancing (SLB) probe (S-Series) W – Transparent Web Cache Balancing (TWCB) probe (S-Series) V – Virtual Router Redundancy Protocol (VRRP) probe U – Tunnel probe R – Static route probe I – IP SLA probe G – Routing Protocol