clear spb basevid

Use this command to clear an ECT algorithm and shortest path VID from a Base-VID configuration.

Syntax

clear spb basevid baseVid [ect-alg] [spvid]

Parameters

baseVid Specifies the Base-VID of the ECT algorithm from the Base-VID configuration to clear. Valid values are 1 - 4094.
ect-alg (Optional) Clears the ECT algorithm configuration.
spvid (Optional) Specifies to only clear the shortest path VID from the specified Base-VID.

Defaults

If spvid is not specified, the ECT algorithm from the specified Base-VID configuration is cleared.

Mode

All command modes.

Examples

This example shows how to clear the Base-VID 1 to ECT algorithm configuration:

System(rw)->clear spb basevid 1 ect-alg
System(rw)->

This example shows how to clear the SPVID assignment for the Base-VID 1 to ECT algorithm configuration:

System(rw)->clear spb basevid 1 ect-alg spvid
System(rw)->