Use this command to reset the HAU delay to its default setting.
None.
0 seconds (no delay).
All command modes.
Using this command sets the HAU delay to 0 seconds. Setting HAU delay to 0 seconds could result in the next HAU group upgrade beginning before some system applications such as OSPF and IGMP multicast being fully operational on the just completed HAU group modules.
This example shows how to reset the delay between the upgrade completion of one HAU group and the beginning of another to 0 seconds:
System(rw)->clear boot high-availability delay System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB