Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set spb port status

Use this command to enable SPB on a port.

Syntax

set spb port port-string status {enable | disable}

Parameters

port-string Specifies the port to SPB enable or disable.
enable | disable Enable or disable SPB on the specified port.

Defaults

SPB is disabled on ports by default.

Mode

All command modes.

Usage

Disabling SPB on a port removes the SPB configuration from that port. You can also use clear spb port to remove SPB configuration from the port.

Examples

This example shows how to enable SPB on ports ge.1.1 through ge.1.5:

System(rw)->set spb port ge.1.1-5 enable
System(rw)->
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page