show antispoof class

Examples

This example shows how to display information for anti-spoofing class 1:

System(rw)->show antispoof class 1
Anti-spoof Class         : 1
Anti-spoof Class Name    :
Anti-spoof Class Timeout : 0
Index  Value  Sys Trap Quar Quarantine-Profile
-----  ----- ---- ---- ---- ------------------
    1     24  ena  ena  ena                 15
    2      0  dis  dis  dis                  0
    3      0  dis  dis  dis                  0
    4      0  dis  dis  dis                  0
    5      0  dis  dis  dis                  0
    6      0  dis  dis  dis                  0
System(rw)->

show antispoof class Output Display provides an explanation of the command output.

show antispoof class Output Display

Output...	What it displays...
Anti-spoof Class	Anti-spoofing class index (see set antispoof class).
Anti-spoof Class Name	Anti-spoofing class name. If not configured, this field is blank (see set antispoof class).
Anti-spoof Class Timeout	Timeout for bindings associated with this class (see set antispoof class).
Index	Threshold index (see set antispoof class threshold-index).
Value	The threshold value for the number of IP address changes detected by anti-spoofing for this threshold index (see set antispoof class threshold-index).
Sys	Syslog action state: enabled (ena) or disabled (dis) (see set antispoof class threshold-index).
Trap	SNMP notification (trap) action state: enabled (ena) or disabled (dis) (see set antispoof class threshold-index).
Quar	Quarantine action state: enabled (ena) or disabled (dis) (see set antispoof class threshold-index).
Quarantine-Profile	The quarantine profile index value assigned to this threshold index. This policy profile is applied when quarantine action is enabled. (See set antispoof class threshold-index.)