Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear nodealias

Use this command to remove one or more node alias entries.

Syntax

clear nodealias {port port-string | alias-id alias-id | protocol protocol}

Parameters

port port-string Specifies the port(s) on which to remove all node alias entries.
alias-id alias-id Specifies the ID of the node alias to remove. This value can be viewed using show nodealias.
protocol protocol Specifies a protocol to clear node alias capture entries for. See the protocols parameter for set nodealias for a list of protocols to clear.

Defaults

None.

Mode

All command modes.

Example

This example shows how to clear all node alias entries on ge.1.13:

System(rw)->clear nodealias port ge.1.13
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page