ipv6 access-group from-vrf

Use this command to apply, in this VRF access context, an IPv6 access list to traffic from the specified VRF.

Syntax

ipv6 access-group list-name from-vrf vrf-name

no ipv6 access-group list-name from-vrf vrf-name

`list-name`	Specifies access list to be applied to this VRF access group. This is an alpha-numeric text name of up to 64 characters.
`vrf-name`	Specifies the VRF that the traffic matching rules in the access list applied to the VRF access group will be inbound from.

None.

VRF Configuration command, VRF access configuration.

The “no” form of this command removes the specified VRF access group from VRF configuration.

This example shows how to apply the IPv6 IPv6list1 ACL to any matching traffic inbound to VRF doc from VRF eng:

System(su-doc-config)->vrf-access
System(su-doc-config-vrf-access)->ipv6 access-group IPv6list1 from-vrf eng
System(su-doc-config-vrf-access)->

Published May 2016prev | next