Use this command to create an IPv6 web cache using the specified name.
| webcache-name | Specifies the name of the web cache to be created. The name may be up to 63 characters in length. |
None.
Configuration command mode.
Up to 10 web caches can be configured on a device. Use the show router limit command to determine the number of web caches supported on the device. A web cache supports a single protocol port such as port 80, 443 or 8080. A web cache can be configured per protocol port for each VRF segment configured on the device.
At least one cache server must be active before a web cache server can become active.
Executing this command enters web cache configuration command mode.
The “no” form of this command removes the specified web cache from the configuration.
This example creates an IPv6 web cache named cache2:
System(rw-config)->ipv6 twcb webcache cache2 System(rw-config-twcb-webcache)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB