Use this command to configure IS-IS hello padding on an interface.
None.
None.
Interface configuration.
IS-IS hello packets by default are padded to the MTU size. Hello padding allows for early detection of errors that result from transmission problems with large frames or errors that result from mismatched MTUs on an interface.
Disabling hello padding lowers network bandwidth usage.
The “no” form of this command disables hello padding on the interface.
This example shows how to disable hello padding on VLAN 100:
System(rw)->configure System(rw-config)->interface vlan 100 System(rw-config-intf-vlan.0.100)->no isis hello-padding System(rw-config-intf-vlan.0.100)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB