set macsec kay mka-life-time

Use this command to set the MACsec MKA lifetime for one or more ports.

Syntax

set macsec kay mka-life-time mka-life-time port-string

Parameters

mka-life-time	Lifetime of potential and live peers. Expiry causes removal from list, and higher interval increases MKA protocol stability.
`mka-life-time`	Lifetime of potential and live peers in seconds. Default is 6 seconds, per IEEE802.1X-2010.
`port-string`	(Optional) Port or range of ports.

Defaults

If a specific port or range of ports is not selected, designated value is for all ports.

Mode

All command modes.

Example

This example shows how to set the MACsec MKA lifetime to 10 seconds on port "ge1.10":

System(su)->set macsec kay mka-life-time 10 ge.1.10
System(su)->show macsec kay ge.1.10

Port         MKA Life Time
------------ -------------
ge.1.10      10

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback