Use this command to set the priority used for the Designated Router (DR) election for this router.
| priority | Specifies a priority value for DR selection. Valid values are 0 - 4294967294. Default value: 1 |
None.
Interface configuration.
The “no” form of this command disables the DR functionality.
This example sets the DR priority to 20 on VLAN 1:
System(su-config)->interface vlan 1 System(su-config-intf-vlan.0.1)->ipv6 pim dr-priority 20
Print
this page
Email this topic
Feedback
View PDF
Download EPUB