this

Use the this command to display IPv4 or IPv6 server farm, real server or virtual server information when within the configuration command mode for the desired entity.

Syntax

this

Parameters

None.

Defaults

None.

Mode

Configuration command, Server farm configuration mode, real server configuration mode, or virtual server configuration mode.

Example

This example displays information for the serverS1 server farm:

System(rw)->configure
System(rw-config)->ip slb serverfarm serverS1
Created serverfarm serverS1
System(rw-config-slb-sfarm)->this
Server-Farm: serverS1 (DOWN)
   Predictor:                ROUND-ROBIN Connections:                     0
   Reals Configured:                   0 Hits:                            0
   Reals Up:                           0 State Changes:                   0
   VServers Configured:                0
Serverfarms in active state: 0
System(rw-config-slb-sfarm)->

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback