Use this command to configure a the policy profile to use when an authentication attempt results in no response from a RADIUS server used in the configured retransmission algorithm.
profile-id | Specifies the RADIUS timeout policy profile ID. |
port-string | The port to configure. |
No policy profile is set.
All command modes.
The RADIUS timeout profile allows you to provision a session that encounters a RADIUS timeout condition, on a per port basis, with a policy profile other than the default policy. The RADIUS timeout profile allows a MAC address that attempted to authenticate during a RADIUS outage to be dealt with in a non-default manner based upon the contents of the specified policy profile.
This example shows how to set the auto-tracking RADIUS timeout profile to 10 for port tg.1.1:
System(rw)->set auto-tracking port idle-timeout-profile 10 tg.1.1