clear access-lists counters

Use this command to clear access list display counters.

Syntax

clear access-lists counters [name | applied [host | interfaces [vlan vlan-id] [inbound | outbound | in-and-out]]

`name`	(Optional) Clears display counters for the specified access list name.
applied host \| interfaces	(Optional) Clears display counters for applied host or interface statistics only.
vlan `vlan-id`	(Optional) Clears display counters for the specified VLAN.
inbound \| outbound \| in-and-out	Clears only only inbound, only outbound, or both inbound and outbound counters.

If no option is specified, the clear action is applied to all access lists.

All command modes.

This example clears the display counters for access list acl10:

System(rw-config)->clear access-lists counters acl10
System(rw-config)->

Published May 2016prev | next