clear dcb cn port-priority

Use this command to clear congestion notification configuration for the specified priority and context.

Syntax

set dcb cn port-priority port-name priority {[choice] [alt-pri] [defense] [lldp]}

port-name	Specifies the port for the CNPV to be cleared.
priority	Specifies the CNPV to be cleared for the specified context.
choice	Resets the domain defense choice to the default of auto on the specified port.
alt-pri	Resets the alternate priority on the specified port for the specified CNPV to the default of next lowest non-CNPV priority value or next highest non-CNPV value if all lower values are CNPV, if global defense choice is set to auto. If global defense choice is set to admin, the alternate priority defaults to 0.
defense	Resets the domain defense method on the specified port for the specified CNPV to the default value of: Edge – If priority choice is set to auto Disabled – If priority choice is set to admin
lldp	Resets the congestion notification LLDP state on the specified port to the default value of enabled.

None.

All command modes.

This example deletes congestion notification entry CNPV 3 on port tg.1.1:

System(rw)->clear dcb cn port-priority tg.1.1 3 entry

Published May 2016prev | next