show policy invalid

Displays information about the action the device will apply on an invalid or unknown policy.

Syntax

show policy invalid {action | count | all}

Parameters

action Displays the action the device should take if asked to apply an invalid or unknown policy. The action is set by set policy invalid action.
count Displays the number of times the device has detected an invalid/unknown policy.
all Displays both action and count information.

Defaults

None.

Mode

All command modes.

Example

This example shows how to display invalid policy action and count information:

System(rw)->show policy invalid all
Current action on invalid/unknown profile is: Forward packets
Number of invalid/unknown profiles detected: 4