show track

Use this command to display information about all tracked objects or a specific tracked object.

Syntax

show track [track-name [detail]]

Parameters

`track-name`	(Optional) Identifies a specific tracked object to display.
detail	(Optional) Specifies to display detailed information about the identified tracked object.

Defaults

If no tracked object is specified, information about all tracked objects is displayed.

If detail is not specified, high-level information about the tracked object is displayed.

Mode

All command modes.

Examples

This example displays information about all tracked objects.

System(su)->show track
Track name                      Type Object (truncated)   Status    Last Change
------------------------------- ---- -------------------- --------- ------------
ls_group                        Port ge.1.1-5             Disabled      2h13m23s
Displayed 1 tracked objects

This example displays detailed information about port group tracked object ls_group.

System(su)->show track ls_group detail
Description: link-state group1
Track ls_group
 Port-Group ge.1.1-5
  5 ports used
  threshold up 3, down 2
  speed 0 [aggregate]
 Status is Disabled
  1 changes, last change  2h13m43s
 Delay up 5 seconds, down 5 seconds
Registrants:
  Link-state
Displayed 1 tracked objects

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback