set flowlimit notification

Use this command to enable or disable flow limit notification, or to set a notification interval.

Syntax

set flowlimit notification {disable | enable | interval}

Parameters

disable | enable Disables or enables SNMP notification.
interval Specifies a notification interval (in seconds) for SNMP trap messages. Valid values are 0 - 4294967295. Default: 120 seconds

Defaults

None.

Mode

All command modes.

Usage

When enabled, this allows ports configured with a “trap” action to send an SNMP trap message when a specified flow limit is reached.

Example

This example shows how to enable the flow limit notification function:

System(rw)->set flowlimit notification enable