show smon vlan

Use this command to display SMON VLAN statistics.

Syntax

show smon vlan [port-string] [vlan vlan-id]

Parameters

port-string	(Optional) Displays SMON VLAN statistics being collected by specific port(s). The 7100-Series must use a VTAP port.
vlan vlan-id	(Optional) Displays SMON statistics associated with a specific VLAN.

Defaults

If port-string is not specified, SMON statistics for all ports will be displayed.
If vlan-id is not specified, statistics for all VLANs will be displayed.

Mode

All command modes.

Example

This example shows how to display SMON VLAN 1 statistics for the SMON enabled port ge.1.1:

System(rw)->show smon vlan vlan 1
Show VLAN Statistics
--------------------
Interface = vtap.0.1
Owner     = none
Creation  = 20 days 1 hours 44 minutes 27 seconds
Status    = enabled
--------------------
VLAN 1                Packets                Octets
Total                 404                    28418
Overflow              0                      0
NonUnicast            302                    19591
NonUnicast Overflow   0                      0
System(rw)->

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback