Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear port inlinepower

Use this command to reset PoE parameters on one or more ports to default values.

Syntax

clear port inlinepower port-string {[admin] [priority] [type] [powerlimit] [capability]}

Parameters

port-string Specifies the port(s) on which to reset PoE.
admin Resets the PoE administrative state to auto (on).
priority Resets the port(s) priority for the PoE allocation algorithm to low.
type Resets the port type to an empty string.
powerlimit Resets the maximum power to 15400 watts.
capability Resets the PoE mode to 802.3af (15.4W maximum power).

Defaults

None.

Mode

All command modes.

Example

This example shows how to rest the PoE priority on port ge.3.1 to low:

System(rw)->clear port inlinepower ge.3.1 priority

Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page