Use this command to display MLD reporters.
| portlist portlist | (Optional) Specifies a port or range of ports |
| group group | (Optional) Multicast group IP address. |
| vlan-list vlan-list | (Optional) VLAN ID or range of IDs. Valid values are 1 – 4094. |
| sip sip | (Optional) Source IP address. Enter :: to display all source IP addresses. |
If no parameters are specified, all MLD reporters are displayed.
All command modes.
An MLD reporter is a host system that sends out MLD reports.
This example displays MLD reporters for this device:
System(su)->show mld reporters MLD Reporters -------------------------------------------------------------------------------- Port = ge.1.26 Multicast Group Address = ff04::1:1:1:1 Vlan Id = 2502 Source IP Address = Any Expire Time(Sec) = 194 Port Mode = Exclude Port = ge.1.27 Multicast Group Address = ff04::1:1:1:1 Vlan Id = 2503 Source IP Address = Any Expire Time(Sec) = 193 Port Mode = Exclude 2 entries displayed System(su)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB