show ip protocols

Example

This example shows how to display IP protocol information:

System(rw)->show ip protocols
Routing Protocol is RIP
  Triggered Updates always
  Sending Updates every 30 seconds
  Invalid after 180 seconds
  Flush after 120 seconds
  Redistributing:
  Send and Receive version 2 only
                        Offset Offset
  Flag      Interface   In     Out    Key-chain
  -----     ----------  ---    ---    ----------
  Routing For Networks:
  Routing Information Sources:
  Distance: (default is 120)
Routing Protocol is OSPF
  Outgoing update filter list for all interfaces is not set
  Incoming update filter list for all interfaces is not set
  Redistributing:  ospf 1
  Routing Information Sources:
199.113.113.0     0.0.0.255