clear cos port-config txq

Use this command to clear one or all non-default Class of Service transmit queue port group configurations.

Syntax

clear cos port-config txq {all | group-type-index} {entry | name | ports arb-slice | arb-percentage | enhanced-groups | enhanced-percentage}

all \| `group-type-index`	Clears all transmit queue port config entries or a specific entry. Valid port group-type entries are in the form of group.type. Group can be 0 - 11, with 0 designating the default group, and 1 - 11 reserved for user-defined groups. Port type can be 0 - 1 for the S- and K-Series and 0 for the 7100-Series.
entry	Clears all non-default transmit queue entries.
name	Clears the name associated with this transmit queue entry.
ports	Clears the port(s) assigned to this port group.
arb-slice	Clears the number of slices setting.
arb-percentage	Clears the percentage of slices setting.
enhanced-groups	Clears the enhanced group for this index.
enhanced-percentage	Clears the enhanced bandwidth percentage for this index.

None.

All command modes.

This example shows how to clear all non-default CoS transmit queue port group entries:

System(rw)->clear cos port-config txq all

Published May 2016prev | next