show ipv6 nat statistics

Use this command to display NAT statistics.

Syntax

show ipv6 nat statistics [-interesting] [-all_vrfs]

Parameters

-interesting	(Optional) Displays only counters with non-zero values.
-all_vrfs	(Optionsl) Displays statistics for all VRFs.

Defaults

If no option is specified, all statistics for the current VRF context display.

Mode

All command modes.

Usage

NAT statistics display as combined count of IPv4 and IPv6 statistics.

Example

This example displays the NAT statistics for this router:

System(rw)->show ipv6 nat statistics
NOTE: This command displays statistics combined from both IPv4 and IPv6 NAT.
NAT Statistics
                Current    High       Deleted    Total
Bindings        1          21         93         94
Resources
Bindings Exhausted:       0          Max Entries Reached:      0
No Global IP Addr:        0          No Portmap Port:          0
No FTP ALG Available:     0
Counters Last Cleared: FRI JUL 13 13:45:05 2012
NAT Extended Statistics (Normalized for 5 seconds)
Bindings Per Sec:         0

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback