Use this command to display enable status of all supported CEP types.
| port-string | Displays CEP status for one or more ports. For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide. |
None
All command modes.
This example shows how to display CEP status information for port ge.1.1:
System(rw)->show cep port ge.1.1 Port H323 Siemens Cisco SIP LLDP-MED ---------- -------- -------- -------- -------- -------- ge.1.1 enabled enabled disabled disabled disabled
Print
this page
Email this topic
Feedback
View PDF
Download EPUB