Use this command to assign an administrative rule to a port.
| port-name | Specifies the port(s) on which to set assign an administrative rule. |
| admin-id | Specify a policy profile index number with a valid range of 1 - 1023 (S-, K-Series) 1 - 63 (7100-Series). |
None.
All command modes.
This example shows how to assign an administrative rule with an index of 20 to port ge.1.3:
System(rw)->set policy port ge.1.3 20
Print
this page
Email this topic
Feedback
View PDF
Download EPUB