This command specifies the maximum time a route can be suppressed.
| seconds | Specifies the maximum amount of time in seconds a route can be suppressed (held). Valid values are 1 - 3600. The default value is 900 seconds. |
None.
Dampen Flap Configuration.
Use the hold-time command to specify the maximum duration in seconds that a route can be suppressed.
The “no” form of this command resets the hold-time to the default value of 900 seconds.
The following example configures the hold-time to 1000 seconds:
System(su-config)->dampen-flap rfd1 System(su-config-dampen-flap)->hold-time 1000
Print
this page
Email this topic
Feedback
View PDF
Download EPUB