Use this command to set the fast timer multiplier for transmitting Fast ULD information TLVs on the specified port.
| port-string | Specifies the port(s) to configure for ULD fast mode fast timer setting. For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide. |
| multiplier | Specifies the ULD fast mode timer multiplier for the specified port. Valid values are integers between 2 and 10 representing the number of 100 millisecond multiples for the timer value (timer value range of 200 milliseconds - 1000 milliseconds (1 second)). The default value is 2 (timer value of 200 milliseconds). |
The fast timer multiplier defaults to 2 (timer value of 200 milliseconds).
All command modes.
This command determines the interval between transmission of OAMPDUs with Fast ULD information TLVs, used by the ULD fast mode to detect unidirectional links. ULD fast mode is set using set port oam uld mode. ULD Fast mode establishes a second tier of OAM discovery by transmitting information OAMPDUs with the Fast ULD information TLV. If a ULD fast mode configured port does not receive the Fast ULD information TLV from its peer within three times the configured fast timer setting, ULD performs the configured ULD action configured using set port oam uld action.
This example shows how to set the transmission of OAMPDUs with Fast ULD information TLVs for port ge.1.2 to 400 milliseconds:
System(rw)->set port oam ge.1.2 uld fast-timer 4
Print
this page
Email this topic
Feedback
View PDF
Download EPUB