show cfm default-md

Examples

This example displays both system level defaults and CFM service defaults for each VLAN configured for defaults:

System(rw)->show cfm default-md
System Default MD values
  MD Level         : 0
  MHF Creation     : None
  MHF ID-permission: None
Default MD Values
VLAN ID MD level MHF-creation   MHF ID-permission Status
------- -------- ------------ ------------------- ------
     10        5        Defer               Defer   True
     20        5        Defer               Defer   True
System(rw)->

show cfm default-md Output Display provides an explanation of the command output.

show cfm default-md Output Display

Output...	What it displays...
MD Level	The system default MD level.
MHF Creation	The maintenance intermediate-point creation behavior system default.
MHF ID-permission	The system default setting for the content sent in the SenderID TLV by the MD.
VLAN ID	The VLAN this MD default row applies to.
Status	True if this VLAN default configuration is enabled. False if this VLAN default configuration is disabled.