Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set port duplex

Use this command to set the default duplex type for one or more ports.

Syntax

set port duplex port-string {full | half}

Parameters

port-string Specifies the port(s) for which duplex type will be set.
full | half Sets the port(s) to full-duplex or half-duplex operation.

Defaults

None.

Mode

All command modes.

Usage

This command will only take effect on ports that have auto-negotiation disabled.

Example

This example shows how to set Gigabit Ethernet slot 1, port 17 to full duplex:

System(rw)->set port duplex ge.1.17 full
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page