ipv6 policy route-map (S-, K-Series)

Use this command to assign a route-map to an IPv6 routing interface.

Syntax

ipv6 policy route-map name
no ipv6 policy route-map name

Parameters

name Specifies the name of the route-map to assign to the IPv6 routing interface.

Defaults

None.

Mode

Interface configuration.

Usage

The no ipv6 policy route-map command removes the specified route-map from the IPv6 routing interface.

Example

This example shows how to assign route-map rtemap1 to VLAN 50:

System(su-config)->interface vlan 50
System(su-config-intf-vlan.0.50)->ipv6 policy route-map rtemap1
System(su-config-intf-vlan.0.50)->